Two packaging lines for automotive components, corrugated carton box and PE/PP polybag, under one QC standard and one delivery schedule.
RSC, die-cut, single/double wall, custom flute and sizing. For component packing, master cartons, and partitions.
Polybags and plastic bags for automotive components, thickness matched to part protection needs.
Carton is counted in pieces and polybag by weight, so each MOQ sits on its own page. If you already know the shape you need, go straight to the spec.
Custom RSC carton boxes: single & double wall, E/B/C/BC flute, flexo print up to 4 colours. Sized from your part, MOQ 500 pcs per design.
Custom pre-opened LDPE poly bags on a roll for autobag machines: mouths already open, perforated to your machine's pitch. Made locally in Tangerang, Indonesia.
Plain PE flat bags for wrapping parts: bottom-seal or side-seal, 30–120 µm, 5–100 cm wide. Made to your part rather than to a stock size, MOQ counted by weight.
New to corrugated packaging? Start with the carton box guide: type, material & process. Need stock kept ready without loading your warehouse? See the Flex-Stock (VMI) program.
Looking for something specific? Low-MOQ custom carton box · custom polybag supplier · carton box manufacturer, Greater Jakarta.
Why JMP
We've packed components for the automotive industry since 1990. What you buy isn't just board and film — it's parts that reach the line without rejects, at a quality you can stand behind when your own customer audits you.
Corrugated carton box and PE/PP polybag from one factory — one QC standard, one delivery schedule. Not two suppliers pointing fingers when something goes wrong on the line.
Other vendors demand big MOQs because small runs are expensive at changeover. We take the other route: custom carton from 500 pcs, polybag 100–300 kg depending on spec and print (measured by weight, not by piece), samples and digital print even from 1 pc. New parts or small volumes still run.
Three decades-plus packing manufacturing parts. Quality is audited against ISO 9001:2015 (AMTIVO/UKAS) — consistency you can document for your own customer audits.
Send a spec or a photo of the part — we build a sample and price it first. You see the result in hand before mass-production cost is spent.
Technology & process
Technology isn't decoration to us. Every machine has a reason — protecting the part all the way to the line, with a result that's consistent and auditable. We run every core process ourselves, under one roof in Tangerang.
Flexo runs up to 4 colours with a ceramic anilox + doctor blade for clean register and consistent colour at high volume. For small runs or dense designs, we print digital directly on corrugated — sharp branding with no plate cost.
Die-cut for custom shapes, slotting for RSC, and stitching for large boxes that must carry load. The result is packaging that fits your part — not a generic box forced to work.
In-house blown-film extrusion, 30–120 micron matched to part protection needs. For automated assembly lines, we support pre-opened roll bags that run on autobag machines — off the dependency on imported bags.
Our sample maker builds a proof from 1 pc before mass production. Quality is checked against measurable standards (e.g. box compression test) under an ISO 9001:2015 system — not just “looks good”.
Want to go deeper? Read how carton boxes are made.
Have a part to package?
A photo of the part and a rough monthly volume is enough to start. No technical drawing needed.
